Molnar Four Post Hoists

Below are some of our Molnar four post hoist models that we are proud to distribute to workshops in Perth and the rest of Western Australia. If you require pricing or more information on our broad range of hoists, please feel free to call our sales department.

  • Molnar Four Post Hoists Brochure
  • Molnar Four Post Hoists Accessories Brochure
  • Molnar Four Post Hoists Air Jacking Beam Brochure

Standard Four Post Hoist

Model 4488S-EL Features

The Molnar 4488S-EL is a standard base model four post hoist and is perfect for the general service workshop. It has a 4 tonne lifting capacity and the customer may opt for jacking beams to allow for wheels free servicing and repairs.

Short Four Post Hoist

Model 4488D-EL Features

The Molnar 4488D-EL four post hoist has reduced length (4 metre), platforms for workshops where space is limited. It has a 4 tonne lifting capacity and the customer may opt for jacking beams to allow for wheels free servicing and repairs.

Wide Four Post Hoist

Model 4488SA-EL Features

For those workshops that service large vehicles, the Molnar 4488SA-EL four post hoist comes with extra width (2700mm), between the pillars, and a platform length of 5,924 mm (including run-ups). It has a 4 tonne lifting capacity and the customer may opt for jacking beams to allow for wheels free servicing and repairs.

Footprint 2907 x 5924 mm (inc run-ups)
Lifting Capacity 4000 kg (4 tonnes)
Platform Length 4580 mm
Width Between Posts 2340 mm
Max Raised Height 1675 mm
Min Lifting Time 24 seconds
Motor 3 phase (optional single phase available)

Footprint 2907 x 5448 mm (inc run-ups)
Lifting Capacity 4000 kg (4 tonnes)
Platform Length 4000 mm
Width Between Posts 2340 mm
Max Raised Height 1675 mm
Min Lifting Time 24 seconds
Motor 3 phase (optional single phase available)

Footprint 3267 x 5924 mm (inc run-ups)
Lifting Capacity 4000 kg (4 tonnes)
Platform Length 4580 mm
Width Between Posts 2700 mm
Max Raised Height 1675 mm
Min Lifting Time 24 seconds
Motor 3 phase (optional single phase available)

Wheel Alignment Four Post Hoist

Model 4488W-EL Features

The Molnar 4488W-EL is a standard four post wheel alignment hoist for tyre shops and those workshops that do wheel alignment along with general servicing. It comes with turntable recesses (415 x 520 x 50 mm) built into the platforms. It has a 4 tonne lifting capacity and the customer may opt for jacking beams which are usually required for wheel alignment and vehicle maintenance operations.

Wide Wheel Alignment Four Post Hoist

Model 4488WA-EL Features

The Molnar 4488WA-EL is an extra wide four post wheel alignment hoist for tyre shops and those workshops that do wheel alignment along with general servicing. It comes with extra width (2700mm), between the pillars, and a platform length of 5,924 mm (including run-ups) and has turntable recesses (415 x 520 x 50 mm) built into the platforms. It has a 4 tonne lifting capacity and the customer may opt for jacking beams which are usually required for wheel alignment and vehicle maintenance operations.

Footprint 3267 x 5924 mm (inc run-ups)
Lifting Capacity 4000 kg (4 tonnes)
Platform Length 4580 mm
Width Between Posts 2700 mm
Max Raised Height 1675 mm
Min Lifting Time 24 seconds
Motor 3 phase (optional single phase available)

Footprint 3267 x 5924 mm (inc run-ups)
Lifting Capacity 4000 kg (4 tonnes)
Platform Length 4580 mm
Width Between Posts 2700 mm
Max Raised Height 1675 mm
Min Lifting Time 24 seconds
Motor 3 phase (optional single phase available)